Slate Roof Installation With Hip and Ridge Joints

Slate roofs are preferred by many as they are among the best types of roofs. Though the installation cost quite a bit of money, slate roofs are great in improving the general appeal of the housing. Usually, homes with this type of roof installation have higher values.

A new roof comes at a price, so if you are considering building a home starting from scratch or if you need a whole new roof, roofing isn’t something you want to take any chances with. We are a trustworthy company that believes in giving nothing less the best residential roofing services to your house. Elite Roofing Halifax offer both residential and commercial roofing customers our top-quality roofing services from our specialized Halifax roofing experts.

Slate roof installation involves setting the hip and ridge joints. Before slating the roof, furring strips along the hip need to be installed. The standard thickness of slates is 3/16″ to 1/4 “. For slates with this thickness, 3/4″ furring strips are recommended. Nail these furring strips to the roof using 2.5” hot dipped galvanized common nails.

On the bottom of the furring strips, install the first piece of the copper flashing using 1.5 copper roofing nail. To hide the furring strips, fold the bottom of the flashing.

Elite Roofing Halifax offer a multitude of benefits for protecting your roof from snow and ice build-up. There is essentially now here for the water to accumulate and gain entry. Compared with shingles, which have a 2-inch coverage, a metal roof has a 100% coverage so water cannot back up and enter your home. Roof installation durable products have experienced dramatic growth in popularity in the past decade. Fire-resistant qualities, longevity, and speed of installation are among the reasons why our customers prefer them.

Slate roof installation follows after the copper flashing has been nailed and folded. Install the slates over the flashing by nailing them into the furring strips. 1.5 copper roofing nails can be used but certain areas need to be attached with 2.5 copper roofing nails.

You should definitely hire a professional Elite Roofing Halifax when you intend to install a new roof or even repair an existing roof. Getting ripped off may be an issue for some consumers, while getting a poor job maybe another. You may even be the victim of a no-show by a contractor. You should ask these questions to ensure they are knowledgeable about their responsibilities to you and look for the answers you need before hiring them.

Install the next piece of step flashing over the hip slates. For this, a single nail will do. After this, nail the next pair of hip slates over it with at least two nails per slate. Fold the flashing lengthwise in half with 4″ in each side. With this, the overlying slates and flashings, the 16″ hip slates are to be overlapped halfway. Meanwhile, the step flashings would be overlapping each other by 2″.

Continue the setting up in this manner, flashing over the top of each pair of hip slates. The hip slates can be installed even without cutting and they do not to be tapered as well. To finish quickly, install the slates in pairs, not one side at a time

Elite Roofing Halifax
2448 Brunswick Street Halifax, NS B3K5X1
+19025100104
https://eliteroofinghalifax.com/

Uncategorized